| AD CATEGORY :: Engines :: Drag Racing |
406 small block chevy FRESH!!!
just back from the machine shop,W/fresh 40 over bore and all machine work.
2 bolt block W/studs
040 over speed pro pistons
cat cast crank & H-beam 5.7 rods
roller cam W/ new lifters:637 lift intake- 630 exhaust. Duration at 050 270 intake- 280 exhaust. 108 lobe separation
Brodix track-1 aluminum heads W/ stainless valves 2.08 intake-1.60 exhaust
Victor JR. type intake
NEW--Pistons,rings,bearings,roller lifters,balancer,valve covers and all machine work.
NO distributor or carb,water pump or pulleys
This item is USED
Trades NOT ACCEPTED
Payment options:
![]() |
![]() |
![]() |
CASH |
Item Location: YORKVILLE, IL Get Directions
Instructions for buyer: Buyer pays all shipping and handling charges
Ad posted by: racerick03 (#42034)
RaceSpace Profile: NONE [REQUEST]
Member Since: 2004-03-28
Number of Honor Payments: 3
Average Accepted Sale Price: $1,100.00
Average Honor Payment: $11.00
Phone Number: 630-553-6183


Questions & Answers about this ad
Question:
Not sure of the compression but can this engine be streetable with 93+high otain boost or 93+110 mix without it running hot? If the motor is streetable could you tell me what the horsepower and torque is rated at? Thanks James
Answer:
It is 11 1/2 to 1 compression. You could run 93 w/30-32 degrees of timing. With a good cooling system you should have no over heating issues. Est. 550-600 H.P. 450 -500 Foot Pounds of Torque. If you have any questions you can call me at 630-553-6183. Thanks, Rick On [2008-06-02 14:43:17] jamesj wrote: > Not sure of the compression but can this engine be streetable with 93+high otain boost or 93+110 mix without it running hot? > > If the motor is streetable could you tell me what the horsepower and torque is rated at? > > Thanks James
RESOURCE LINKS








