Transmission Specialties ProLine 6000

Questions & Answers about this ad

Question:

howdy, what stall is the convertor, and what kind of HP is it good for. Will it handle a blower set up? Thanks Dean

Answer:

its a 10" conv. stall speed is 4200 rpm trans is good for 2500+ hp it would be perfect for your blower setup thanks dave n [2007-06-25 22:54:41] owdy, what stall is the convertor, and what kind of HP is it good for. Will it handle a blower set up? > > Thanks > > Dean

Questions & Answers about this ad

Question:

Would you be able to crate for that price? I haven't looked into shipping as yet, but I think it will be a bit of a bastered. Dean On [2007-06-27 11:04:00] mrnos wrote: > $3000.00 > > On [2007-06-26 22:29:34] meandean wrote: > > Perfect, whats the best you could do on it? > > > > Dean > > > > On [2007-06-26 10:25:39] mrnos wrote: > > > its a 10" conv. stall speed is 4200 rpm trans is good for 2500+ hp it would be perfect for your blower setup thanks dave > > > n [2007-06-25 22:54:41] owdy, what stall is the convertor, and what kind of HP is it good for. Will it handle a blower set up? > > > > > > > > Thanks > > > > > > > > Dean > > > > > >

Answer:

yes i will put it on a pallet On [2007-06-28 00:35:19] meandean wrote: > Would you be able to crate for that price? I haven't looked into shipping as yet, but I think it will be a bit of a bastered. > > Dean > On [2007-06-27 11:04:00] mrnos wrote: > > $3000.00 > > > > On [2007-06-26 22:29:34] meandean wrote: > > > Perfect, whats the best you could do on it? > > > > > > Dean > > > > > > On [2007-06-26 10:25:39] mrnos wrote: > > > > its a 10" conv. stall speed is 4200 rpm trans is good for 2500+ hp it would be perfect for your blower setup thanks dave > > > > n [2007-06-25 22:54:41] owdy, what stall is the convertor, and what kind of HP is it good for. Will it handle a blower set up? > > > > > > > > > > Thanks > > > > > > > > > > Dean > > > > > > > > > >

Questions & Answers about this ad

Question:

2500 CASH FOR TRANS?

Answer:

this trans package was $7000 when i bought it i will consider $2850 cash no less thanks On [2007-06-28 17:38:26] jlf632 wrote: > 2500 CASH FOR TRANS?

Questions & Answers about this ad

Question:

how many TOTAL passes are on the planetary ?, was it freshend by tsi ? I have sold my rossler xhd210 and was thinking of buying a glide, I haven"t seen them advertize this piece in a while, do they still make it ? I"d sat I"m a 9 out of 10 on buying it. but want to call tsi with a few questions, my motor makes 2439 on oddys dyno, the glide is faster in the 1/8 {which is what we mainly race} but how much will the lock up give you ?? {how much rpm will it drop ?} tryin to figure out if a guy could run 1/4 mile. thanks steve

Answer:

hey steve there is about 35 passes on this transit was freshend and up dated about 2years ago and only has 8 passes since then it is a good trans and is worth 5-7 mph with lockup i had it behind my 632 nitrous motor with aprox. 1800 hp on 3 stages in a 2700lb outlaw street car it worked perfect i sold the body last year and the trans is all i have left any other q uestions give me a call (215)949-8786 thanks dave On [2007-09-22 01:29:18] skeen wrote: > how many TOTAL passes are on the planetary ?, was it freshend by tsi ? I have sold my rossler xhd210 and was thinking of buying a glide, I haven"t seen them advertize this piece in a while, do they still make it ? I"d sat I"m a 9 out of 10 on buying it. but want to call tsi with a few questions, my motor makes 2439 on oddys dyno, the glide is faster in the 1/8 {which is what we mainly race} but how much will the lock up give you ?? {how much rpm will it drop ?} tryin to figure out if a guy could run 1/4 mile. thanks steve

Questions & Answers about this ad

Question:

i am looking at a tranny for my 63 vette with 632ci...what is the gear ratio..and a little history of the tranny ,what did it come out of and what are the internal..i would like to know what you would take for the tranny by itself.. i am about ready to buy a NEW trans speacialties tranny..i have already contacted pete... BUT... if you would work a good deal with me on your tranny alone..i had much better go this route. Thanks- Brian PS... for the record to let you know i am not some guy wasting your time i work for RJ as one of their moderators on the forum section..i have nothing to do with classifieds..just monitor the forums or anything that goes on over there. if you go to the forum in the show off section..you will see my vette...find the thread that says "latest and greatest of bjuice rides".... THANSK AGAIN bRIAN

Answer:

hey brian this trans was behind my 632 big chief nos toyota celica i ran in outlaw street years ago this trans is fresh with the upgrades trans spec. no longer builds these tranys with the lock up conv. this trans will hold 2500+ hp and is good for 5 to 7 mph when lock up is used the trans needs to be used with this conv. with lock up i am selling it complete u may be able to convert it back to a non lock up you would have to contact trans spec. this combo works very well if you follow instructions and have at least 1600+hp i will let the pkg. go for $3000 complete this was a $7000 pkg.when it came out nhra outlawed this trans for nhra events but is a perfect piece for outlaw racing to go real fast if your serious give me a call at my shop a&w perf. (215)949-8786 thanks dave On [2007-10-09 19:45:23] bjuice wrote: > i am looking at a tranny for my 63 vette with 632ci...what is the gear ratio..and a little history of the tranny ,what did it come out of and what are the internal..i would like to know what you would take for the tranny by itself.. > > i am about ready to buy a NEW trans speacialties tranny..i have already contacted pete... > BUT... > > if you would work a good deal with me on your tranny alone..i had much better go this route. > > Thanks- Brian > > > PS... > for the record to let you know i am not some guy wasting your time i work for RJ as one of their moderators on the forum section..i have nothing to do with classifieds..just monitor the forums or anything that goes on over there. > if you go to the forum in the show off section..you will see my vette...find the thread that says "latest and greatest of bjuice rides".... > > THANSK AGAIN bRIAN

Questions & Answers about this ad

Question:

Are you willing to seperate. If so how much for just the trans shipped to Daytona Beach, Florida.

Answer:

$2500 for just the trans aprox. $125 to ship On [2007-11-02 23:36:24] bolo2846 wrote: > Are you willing to seperate. If so how much for just the trans shipped to Daytona Beach, Florida.

Questions & Answers about this ad

Question:

What are you asking just for the glide?

Answer:

$2500 On [2007-11-07 16:19:45] notanothervega wrote: > What are you asking just for the glide?

Questions & Answers about this ad

Question:

Will you take 2200.00 for just the glide? thanks-

Answer:

$2400 On [2007-11-18 20:16:10] notanothervega wrote: > Will you take 2200.00 for just the glide? > > thanks-

Questions & Answers about this ad

Question:

Still have the glide? On [2007-11-07 16:19:45] notanothervega wrote: > What are you asking just for the glide?

Answer:

yes it is for sale On [2007-12-02 19:38:31] notanothervega wrote: > Still have the glide? > > On [2007-11-07 16:19:45] notanothervega wrote: > > What are you asking just for the glide? >

Questions & Answers about this ad

Question:

Hey Dave, Sorry, I didn't get back to you but I was waiting on my builder w/ the the other unit.I know we talked about the whole package for 3000$and you bringing to NJ. but I think i just want the glide and convertor will you take 2700$ and I'll make the trip out to your place. thx Pat- 516-790-1567

Answer:

pat the trans and converter is the whole package you will need the spacers and the air solonoid and cyl. are mounted on the trans if you dont need the air bottle and bkt. i'll take $2900 and you pick it up at my shop. thanks dave On [2008-01-12 13:31:23] notanothervega wrote: > Hey Dave, > > Sorry, I didn't get back to you but I was waiting on my builder w/ the the other unit.I know we talked about the whole package for 3000$and you bringing to NJ. but I think i just want the glide and convertor will you take 2700$ and I'll make the trip out to your place. thx Pat- 516-790-1567